HELICAL
3 FL - Ball - 40° Helix - 0.7500" (3/4) Cutter DIA x 0.7500" (3/4) Shank DIA x 1.0000" (1) LOC x 7.0000" (7) OAL x 4.1250" (4-1/8) Reach - Uncoated
- SKU:
- HELSO1-83573
- MPN:
- 83573
- Shipping:
- Calculated at Checkout
Description
0.7500" (3/4) Cutter DIA x 0.7500" (3/4) Shank DIA x 1.0000" (1) Length of Cut x 7.0000" (7) Overall Length x 4.1250" (4-1/8) Reach Carbide 40° Helix Ball End Mill for Aluminum, 3 Flutes, Uncoated - (H40ALV-RN-ML-30750-BN)
View AllClose
Additional Information
Cutter Diameter: |
0.7500" (3/4) |
Neck Diameter: |
0.7120" |
Length of Cut: |
1.0000" (1) |
Overall Reach: |
4.1250" (4-1/8) |
Overall Length: |
7.0000" (7) |
Flutes: |
3 |
LOC Multiple: |
(1.3x) |
Shank Diameter: |
0.7500" (3/4) |
Metric: |
N |
Shank Length: |
2.8750" (2-7/8) |
Coating: |
UN |
Center Cutting: |
Y |
Chip Breaker: |
N |
Weldon Flat: |
N |
Coolant Through: |
N |
Related Products
Related Products
3 FL - Square - 40° Helix - 0.7500" (3/4) Cutter DIA x 0.7500" (3/4) Shank DIA x 1.0000" (1) LOC x 7.0000" (7) OAL x 4.1250" (4-1/8) Reach - Uncoated
HELICAL
$281.40
0.7500" (3/4) Cutter DIA x 0.7500" (3/4) Shank DIA x 1.0000" (1) Length of Cut x 7.0000" (7) Overall Length x 4.1250" (4-1/8) Reach Carbide 40° Helix Square End Mill for Aluminum, 3 Flutes, Uncoated...
HELSO1-81487
3 FL - Ball - 40° Helix - 0.7500" (3/4) Cutter DIA x 0.7500" (3/4) Shank DIA x 1.0000" (1) LOC x 7.0000" (7) OAL x 4.1250" (4-1/8) Reach - ZPLUS Coated
HELICAL
$334.20
0.7500" (3/4) Cutter DIA x 0.7500" (3/4) Shank DIA x 1.0000" (1) Length of Cut x 7.0000" (7) Overall Length x 4.1250" (4-1/8) Reach Carbide 40° Helix Ball End Mill for Aluminum, 3 Flutes, ZPLUS...
HELSO1-83574
3 FL - Ball - 40° Helix - 0.7500" (3/4) Cutter DIA x 0.7500" (3/4) Shank DIA x 1.0000" (1) LOC x 7.0000" (7) OAL x 5.0000" (5) Reach - Uncoated
HELICAL
$318.30
0.7500" (3/4) Cutter DIA x 0.7500" (3/4) Shank DIA x 1.0000" (1) Length of Cut x 7.0000" (7) Overall Length x 5.0000" (5) Reach Carbide 40° Helix Ball End Mill for Aluminum, 3 Flutes, Uncoated -...
HELSO1-47390
3 FL - Square - 40° Helix - 0.7500" (3/4) Cutter DIA x 0.7500" (3/4) Shank DIA x 1.0000" (1) LOC x 7.0000" (7) OAL x 4.1250" (4-1/8) Reach - ZPLUS Coated
HELICAL
$324.05
0.7500" (3/4) Cutter DIA x 0.7500" (3/4) Shank DIA x 1.0000" (1) Length of Cut x 7.0000" (7) Overall Length x 4.1250" (4-1/8) Reach Carbide 40° Helix Square End Mill for Aluminum, 3 Flutes, ZPLUS...
HELSO1-81488
3 FL - Corner Radius - 40° Helix - 0.7500" (3/4) Cutter DIA x 0.7500" (3/4) Shank DIA x 0.0300" Radius x 1.0000" (1) LOC x 7.0000" (7) OAL x 4.1250" (4-1/8) Reach - Uncoated
HELICAL
$288.60
0.7500" (3/4) Cutter DIA x 0.7500" (3/4) Shank DIA x 0.0300" Radius x 1.0000" (1) Length of Cut x 7.0000" (7) Overall Length x 4.1250" (4-1/8) Reach Carbide 40° Helix Corner Radius End Mill for...
HELSO1-81525