HELICAL
3 FL - Ball - 40° Helix - 0.5000" (1/2) Cutter DIA x 0.5000" (1/2) Shank DIA x 3.1250" (3-1/8) LOC x 6.0000" (6) OAL - Uncoated
- SKU:
- HELSO1-86976
- MPN:
- 86976
- Shipping:
- Calculated at Checkout
Description
0.5000" (1/2) Cutter DIA x 0.5000" (1/2) Shank DIA x 3.1250" (3-1/8) Length of Cut x 6.0000" (6) Overall Length Carbide 40° Helix Ball End Mill for Aluminum, 3 Flutes, Uncoated - (H40ALV-X-30500-BN)
View AllClose
Additional Information
Cutter Diameter: |
0.5000" (1/2) |
Length of Cut: |
3.1250" (3-1/8) |
Overall Length: |
6.0000" (6) |
Flutes: |
3 |
LOC Multiple: |
(6.3x) |
Shank Diameter: |
0.5000" (1/2) |
Metric: |
N |
Coating: |
UN |
Center Cutting: |
Y |
Chip Breaker: |
N |
Weldon Flat: |
N |
Coolant Through: |
N |
Related Products
Related Products
3 FL - Square - 40° Helix - 0.5000" (1/2) Cutter DIA x 0.5000" (1/2) Shank DIA x 3.1250" (3-1/8) LOC x 6.0000" (6) OAL - Uncoated
HELICAL
$99.00
0.5000" (1/2) Cutter DIA x 0.5000" (1/2) Shank DIA x 3.1250" (3-1/8) Length of Cut x 6.0000" (6) Overall Length Carbide 40° Helix Square End Mill for Aluminum, 3 Flutes, Uncoated - (H40ALV-X-30500)
HELSO1-82397
3 FL - Square - 45° Helix - 0.5000" (1/2) Cutter DIA x 0.5000" (1/2) Shank DIA x 3.1250" (3-1/8) LOC x 6.0000" (6) OAL - Uncoated
HELICAL
$153.80
0.5000" (1/2) Cutter DIA x 0.5000" (1/2) Shank DIA x 3.1250" (3-1/8) Length of Cut x 6.0000" (6) Overall Length Carbide 45° Helix Square End Mill for Aluminum, 3 Flutes, Uncoated - (H45AL-X-30500)
HELSO1-03525
3 FL - Square - 35° Helix - 0.5000" (1/2) Cutter DIA x 0.5000" (1/2) Shank DIA x 3.1250" (3-1/8) LOC x 6.0000" (6) OAL - Uncoated
HELICAL
$152.00
0.5000" (1/2) Cutter DIA x 0.5000" (1/2) Shank DIA x 3.1250" (3-1/8) Length of Cut x 6.0000" (6) Overall Length Carbide 35° Helix Square End Mill for Aluminum, 3 Flutes, Uncoated - (H35AL-X-30500)
HELSO1-01525
2 FL - Square - 45° Helix - 0.5000" (1/2) Cutter DIA x 0.5000" (1/2) Shank DIA x 3.1250" (3-1/8) LOC x 6.0000" (6) OAL - Uncoated
HELICAL
$151.00
0.5000" (1/2) Cutter DIA x 0.5000" (1/2) Shank DIA x 3.1250" (3-1/8) Length of Cut x 6.0000" (6) Overall Length Carbide 45° Helix Square End Mill for Aluminum, 2 Flutes, Uncoated - (H45AL-X-20500)
HELSO1-00525
3 FL - Ball - 40° Helix - 0.5000" (1/2) Cutter DIA x 0.5000" (1/2) Shank DIA x 3.1250" (3-1/8) LOC x 6.0000" (6) OAL - ZPLUS Coated
HELICAL
$134.20
0.5000" (1/2) Cutter DIA x 0.5000" (1/2) Shank DIA x 3.1250" (3-1/8) Length of Cut x 6.0000" (6) Overall Length Carbide 40° Helix Ball End Mill for Aluminum, 3 Flutes, ZPLUS Coated -...
HELSO1-86977