HELICAL
3 FL - Ball - 40° Helix - 0.3750" (3/8) Cutter DIA x 0.3750" (3/8) Shank DIA x 2.5000" (2-1/2) LOC x 5.0000" (5) OAL - ZPLUS Coated
- SKU:
- HELSO1-86083
- MPN:
- 86083
- Shipping:
- Calculated at Checkout
Description
0.3750" (3/8) Cutter DIA x 0.3750" (3/8) Shank DIA x 2.5000" (2-1/2) Length of Cut x 5.0000" (5) Overall Length Carbide 40° Helix Ball End Mill for Aluminum, 3 Flutes, ZPLUS Coated - (H40ALV-X-30375-BN)
View AllClose
Additional Information
Cutter Diameter: |
0.3750" (3/8) |
Length of Cut: |
2.5000" (2-1/2) |
Overall Length: |
5.0000" (5) |
Flutes: |
3 |
LOC Multiple: |
(6.6x) |
Shank Diameter: |
0.3750" (3/8) |
Metric: |
N |
Shank Length: |
2.5000" (2-1/2) |
Coating: |
ZPLUS |
Center Cutting: |
Y |
Chip Breaker: |
N |
Weldon Flat: |
N |
Coolant Through: |
N |
Related Products
Related Products
3 FL - Square - 40° Helix - 0.3750" (3/8) Cutter DIA x 0.3750" (3/8) Shank DIA x 2.5000" (2-1/2) LOC x 5.0000" (5) OAL - ZPLUS Coated
HELICAL
$85.25
0.3750" (3/8) Cutter DIA x 0.3750" (3/8) Shank DIA x 2.5000" (2-1/2) Length of Cut x 5.0000" (5) Overall Length Carbide 40° Helix Square End Mill for Aluminum, 3 Flutes, ZPLUS Coated -...
HELSO1-86069
3 FL - Square - 35° Helix - 0.3750" (3/8) Cutter DIA x 0.3750" (3/8) Shank DIA x 2.5000" (2-1/2) LOC x 5.0000" (5) OAL - ZPLUS Coated
HELICAL
$105.15
0.3750" (3/8) Cutter DIA x 0.3750" (3/8) Shank DIA x 2.5000" (2-1/2) Length of Cut x 5.0000" (5) Overall Length Carbide 35° Helix Square End Mill for Aluminum, 3 Flutes, ZPLUS Coated - (H35AL-X-30375)
HELSO1-01407
3 FL - Ball - 40° Helix - 0.3750" (3/8) Cutter DIA x 0.3750" (3/8) Shank DIA x 0.5000" (1/2) LOC x 5.0000" (5) OAL x 2.5000" (2-1/2) Reach - ZPLUS Coated
HELICAL
$88.15
0.3750" (3/8) Cutter DIA x 0.3750" (3/8) Shank DIA x 0.5000" (1/2) Length of Cut x 5.0000" (5) Overall Length x 2.5000" (2-1/2) Reach Carbide 40° Helix Ball End Mill for Aluminum, 3 Flutes, ZPLUS...
HELSO1-81544
3 FL - Ball - 40° Helix - 0.3750" (3/8) Cutter DIA x 0.3750" (3/8) Shank DIA x 1.0000" (1) LOC x 2.5000" (2-1/2) OAL - ZPLUS Coated
HELICAL
$69.55
0.3750" (3/8) Cutter DIA x 0.3750" (3/8) Shank DIA x 1.0000" (1) Length of Cut x 2.5000" (2-1/2) Overall Length Carbide 40° Helix Ball End Mill for Aluminum, 3 Flutes, ZPLUS Coated -...
HELSO1-49211
3 FL - Ball - 40° Helix - 0.3750" (3/8) Cutter DIA x 0.3750" (3/8) Shank DIA x 2.5000" (2-1/2) LOC x 5.0000" (5) OAL - Uncoated
HELICAL
$80.90
0.3750" (3/8) Cutter DIA x 0.3750" (3/8) Shank DIA x 2.5000" (2-1/2) Length of Cut x 5.0000" (5) Overall Length Carbide 40° Helix Ball End Mill for Aluminum, 3 Flutes, Uncoated - (H40ALV-X-30375-BN)
HELSO1-86082