HELICAL
3 FL - Ball - 40° Helix - 0.3125" (5/16) Cutter DIA x 0.3125" (5/16) Shank DIA x 0.4375" (7/16) LOC x 4.0000" (4) OAL x 1.1250" (1-1/8) Reach - ZPLUS Coated
- SKU:
- HELSO1-86513
- MPN:
- 86513
- Shipping:
- Calculated at Checkout
Description
0.3125" (5/16) Cutter DIA x 0.3125" (5/16) Shank DIA x 0.4375" (7/16) Length of Cut x 4.0000" (4) Overall Length x 1.1250" (1-1/8) Reach Carbide 40° Helix Ball End Mill for Aluminum, 3 Flutes, ZPLUS Coated - (H40ALV-RN-S-30312-BN)
View AllClose
Additional Information
Cutter Diameter: |
0.3125" (5/16) |
Neck Diameter: |
0.2960" |
Length of Cut: |
0.4375" (7/16) |
Overall Reach: |
1.1250" (1-1/8) |
Overall Length: |
4.0000" (4) |
Flutes: |
3 |
LOC Multiple: |
(1.4x) |
Shank Diameter: |
0.3125" (5/16) |
Metric: |
N |
Shank Length: |
2.8750" (2-7/8) |
Coating: |
ZPLUS |
Center Cutting: |
Y |
Chip Breaker: |
N |
Weldon Flat: |
N |
Coolant Through: |
N |
Related Products
Related Products
3 FL - Square - 40° Helix - 0.3125" (5/16) Cutter DIA x 0.3125" (5/16) Shank DIA x 0.4375" (7/16) LOC x 4.0000" (4) OAL x 1.1250" (1-1/8) Reach - ZPLUS Coated
HELICAL
$55.45
0.3125" (5/16) Cutter DIA x 0.3125" (5/16) Shank DIA x 0.4375" (7/16) Length of Cut x 4.0000" (4) Overall Length x 1.1250" (1-1/8) Reach Carbide 40° Helix Square End Mill for Aluminum, 3 Flutes,...
HELSO1-86501
2 FL - Ball - 45° Helix - 0.3125" (5/16) Cutter DIA x 0.3125" (5/16) Shank DIA x 0.4375" (7/16) LOC x 4.0000" (4) OAL x 1.1250" (1-1/8) Reach - ZPLUS Coated
HELICAL
$49.85
0.3125" (5/16) Cutter DIA x 0.3125" (5/16) Shank DIA x 0.4375" (7/16) Length of Cut x 4.0000" (4) Overall Length x 1.1250" (1-1/8) Reach Carbide 45° Helix Ball End Mill for Aluminum, 2 Flutes, ZPLUS...
HELSO1-18167
3 FL - Ball - 40° Helix - 0.3125" (5/16) Cutter DIA x 0.3125" (5/16) Shank DIA x 0.4375" (7/16) LOC x 4.0000" (4) OAL x 1.1250" (1-1/8) Reach - Uncoated
HELICAL
$57.00
0.3125" (5/16) Cutter DIA x 0.3125" (5/16) Shank DIA x 0.4375" (7/16) Length of Cut x 4.0000" (4) Overall Length x 1.1250" (1-1/8) Reach Carbide 40° Helix Ball End Mill for Aluminum, 3 Flutes,...
HELSO1-86512
3 FL - Square - 45° Helix - 0.3125" (5/16) Cutter DIA x 0.3125" (5/16) Shank DIA x 0.4375" (7/16) LOC x 4.0000" (4) OAL x 1.1250" (1-1/8) Reach - ZPLUS Coated
HELICAL
$44.95
0.3125" (5/16) Cutter DIA x 0.3125" (5/16) Shank DIA x 0.4375" (7/16) Length of Cut x 4.0000" (4) Overall Length x 1.1250" (1-1/8) Reach Carbide 45° Helix Square End Mill for Aluminum, 3 Flutes,...
HELSO1-19167
Out of stock
3 FL - Square - 35° Helix - 0.3125" (5/16) Cutter DIA x 0.3125" (5/16) Shank DIA x 0.4375" (7/16) LOC x 4.0000" (4) OAL x 1.1250" (1-1/8) Reach - ZPLUS Coated
HELICAL
$43.75
0.3125" (5/16) Cutter DIA x 0.3125" (5/16) Shank DIA x 0.4375" (7/16) Length of Cut x 4.0000" (4) Overall Length x 1.1250" (1-1/8) Reach Carbide 35° Helix Square End Mill for Aluminum, 3 Flutes,...
HELSO1-04167