HELICAL
3 FL - Ball - 40° Helix - 0.1250" (1/8) Cutter DIA x 0.1250" (1/8) Shank DIA x 0.1562" (5/32) LOC x 3.0000" (3) OAL x 1.2500" (1-1/4) Reach - ZPLUS Coated
- SKU:
- HELSO1-82486
- MPN:
- 82486
- Shipping:
- Calculated at Checkout
Description
0.1250" (1/8) Cutter DIA x 0.1250" (1/8) Shank DIA x 0.1562" (5/32) Length of Cut x 3.0000" (3) Overall Length x 1.2500" (1-1/4) Reach Carbide 40° Helix Ball End Mill for Aluminum, 3 Flutes, ZPLUS Coated - (H40ALV-RN-LX-30125-BN)
View AllClose
Additional Information
Cutter Diameter: |
0.1250" (1/8) |
Neck Diameter: |
0.1180" (3 mm) |
Length of Cut: |
0.1562" (5/32) |
Overall Reach: |
1.2500" (1-1/4) |
Overall Length: |
3.0000" (3) |
Flutes: |
3 |
LOC Multiple: |
(1.2x) |
Reach Multiple: |
(10x) |
Shank Diameter: |
0.1250" (1/8) |
Metric: |
N |
Shank Length: |
1.7500" (1-3/4) |
Coating: |
ZPLUS |
Center Cutting: |
Y |
Chip Breaker: |
N |
Weldon Flat: |
N |
Coolant Through: |
N |
Related Products
Related Products
3 FL - Square - 40° Helix - 0.1250" (1/8) Cutter DIA x 0.1250" (1/8) Shank DIA x 0.1562" (5/32) LOC x 3.0000" (3) OAL x 1.2500" (1-1/4) Reach - ZPLUS Coated
HELICAL
$54.20
0.1250" (1/8) Cutter DIA x 0.1250" (1/8) Shank DIA x 0.1562" (5/32) Length of Cut x 3.0000" (3) Overall Length x 1.2500" (1-1/4) Reach Carbide 40° Helix Square End Mill for Aluminum, 3 Flutes, ZPLUS...
HELSO1-82470
3 FL - Ball - 40° Helix - 0.1250" (1/8) Cutter DIA x 0.1250" (1/8) Shank DIA x 0.1562" (5/32) LOC x 3.0000" (3) OAL x 1.0000" (1) Reach - ZPLUS Coated
HELICAL
$60.70
0.1250" (1/8) Cutter DIA x 0.1250" (1/8) Shank DIA x 0.1562" (5/32) Length of Cut x 3.0000" (3) Overall Length x 1.0000" (1) Reach Carbide 40° Helix Ball End Mill for Aluminum, 3 Flutes, ZPLUS Coated...
HELSO1-81534
3 FL - Ball - 40° Helix - 0.1250" (1/8) Cutter DIA x 0.1250" (1/8) Shank DIA x 0.1562" (5/32) LOC x 3.0000" (3) OAL x 0.7500" (3/4) Reach - ZPLUS Coated
HELICAL
$53.10
0.1250" (1/8) Cutter DIA x 0.1250" (1/8) Shank DIA x 0.1562" (5/32) Length of Cut x 3.0000" (3) Overall Length x 0.7500" (3/4) Reach Carbide 40° Helix Ball End Mill for Aluminum, 3 Flutes, ZPLUS...
HELSO1-47046
3 FL - Square - 45° Helix - 0.1250" (1/8) Cutter DIA x 0.1250" (1/8) Shank DIA x 0.1562" (5/32) LOC x 3.0000" (3) OAL x 1.2500" (1-1/4) Reach - ZPLUS Coated
HELICAL
$48.30
0.1250" (1/8) Cutter DIA x 0.1250" (1/8) Shank DIA x 0.1562" (5/32) Length of Cut x 3.0000" (3) Overall Length x 1.2500" (1-1/4) Reach Carbide 45° Helix Square End Mill for Aluminum, 3 Flutes, ZPLUS...
HELSO1-83708
3 FL - Square - 35° Helix - 0.1250" (1/8) Cutter DIA x 0.1250" (1/8) Shank DIA x 0.1562" (5/32) LOC x 3.0000" (3) OAL x 1.2500" (1-1/4) Reach - ZPLUS Coated
HELICAL
$48.80
0.1250" (1/8) Cutter DIA x 0.1250" (1/8) Shank DIA x 0.1562" (5/32) Length of Cut x 3.0000" (3) Overall Length x 1.2500" (1-1/4) Reach Carbide 35° Helix Square End Mill for Aluminum, 3 Flutes, ZPLUS...
HELSO1-83442