HELICAL
2 FL - Square - 45° Helix - 0.7500" (3/4) Cutter DIA x 0.7500" (3/4) Shank DIA x 1.0000" (1) LOC x 4.0000" (4) OAL x 2.0000" (2) Reach - ZPLUS Coated
- SKU:
- HELSO1-02407
- MPN:
- 02407
- Shipping:
- Calculated at Checkout
Description
0.7500" (3/4) Cutter DIA x 0.7500" (3/4) Shank DIA x 1.0000" (1) Length of Cut x 4.0000" (4) Overall Length x 2.0000" (2) Reach Carbide 45° Helix Square End Mill for Aluminum, 2 Flutes, ZPLUS Coated - (H45AL-RN-R-20750)
View AllClose
Additional Information
Cutter Diameter: |
0.7500" (3/4) |
Neck Diameter: |
0.7120" |
Length of Cut: |
1.0000" (1) |
Overall Reach: |
2.0000" (2) |
Overall Length: |
4.0000" (4) |
Flutes: |
2 |
LOC Multiple: |
(1.3x) |
Shank Diameter: |
0.7500" (3/4) |
Metric: |
N |
Shank Length: |
2.0000" (2) |
Coating: |
ZPLUS |
Center Cutting: |
Y |
Chip Breaker: |
N |
Weldon Flat: |
N |
Coolant Through: |
N |
Related Products
Related Products
3 FL - Square - 45° Helix - 0.7500" (3/4) Cutter DIA x 0.7500" (3/4) Shank DIA x 1.0000" (1) LOC x 4.0000" (4) OAL x 2.0000" (2) Reach - ZPLUS Coated
HELICAL
$208.25
0.7500" (3/4) Cutter DIA x 0.7500" (3/4) Shank DIA x 1.0000" (1) Length of Cut x 4.0000" (4) Overall Length x 2.0000" (2) Reach Carbide 45° Helix Square End Mill for Aluminum, 3 Flutes, ZPLUS Coated...
HELSO1-19407
2 FL - Ball - 45° Helix - 0.7500" (3/4) Cutter DIA x 0.7500" (3/4) Shank DIA x 1.0000" (1) LOC x 4.0000" (4) OAL x 2.0000" (2) Reach - ZPLUS Coated
HELICAL
$151.97
0.7500" (3/4) Cutter DIA x 0.7500" (3/4) Shank DIA x 1.0000" (1) Length of Cut x 4.0000" (4) Overall Length x 2.0000" (2) Reach Carbide 45° Helix Ball End Mill for Aluminum, 2 Flutes, ZPLUS Coated -...
HELSO1-18407
3 FL - Square - 45° Helix - 0.7500" (3/4) Cutter DIA x 0.7500" (3/4) Shank DIA x 2.0000" (2) LOC x 4.0000" (4) OAL - ZPLUS Coated
HELICAL
$210.75
0.7500" (3/4) Cutter DIA x 0.7500" (3/4) Shank DIA x 2.0000" (2) Length of Cut x 4.0000" (4) Overall Length Carbide 45° Helix Square End Mill for Aluminum, 3 Flutes, ZPLUS Coated - (H45AL-A-30750)
HELSO1-81562
3 FL - Square - 35° Helix - 0.7500" (3/4) Cutter DIA x 0.7500" (3/4) Shank DIA x 1.0000" (1) LOC x 4.0000" (4) OAL x 2.0000" (2) Reach - ZPLUS Coated
HELICAL
$203.45
0.7500" (3/4) Cutter DIA x 0.7500" (3/4) Shank DIA x 1.0000" (1) Length of Cut x 4.0000" (4) Overall Length x 2.0000" (2) Reach Carbide 35° Helix Square End Mill for Aluminum, 3 Flutes, ZPLUS Coated...
HELSO1-04407
3 FL - Square - 40° Helix - 0.7500" (3/4) Cutter DIA x 0.7500" (3/4) Shank DIA x 1.0000" (1) LOC x 4.0000" (4) OAL x 2.0000" (2) Reach - ZPLUS Coated
HELICAL
$228.65
0.7500" (3/4) Cutter DIA x 0.7500" (3/4) Shank DIA x 1.0000" (1) Length of Cut x 4.0000" (4) Overall Length x 2.0000" (2) Reach Carbide 40° Helix Square End Mill for Aluminum, 3 Flutes, ZPLUS Coated...
HELSO1-46556