HELICAL
2 FL - Square - 45° Helix - 0.6250" (5/8) Cutter DIA x 0.6250" (5/8) Shank DIA x 0.7500" (3/4) LOC x 4.0000" (4) OAL x 1.6250" (1-5/8) Reach - ZPLUS Coated
- SKU:
- HELSO1-02347
- MPN:
- 02347
- Shipping:
- Calculated at Checkout
Description
0.6250" (5/8) Cutter DIA x 0.6250" (5/8) Shank DIA x 0.7500" (3/4) Length of Cut x 4.0000" (4) Overall Length x 1.6250" (1-5/8) Reach Carbide 45° Helix Square End Mill for Aluminum, 2 Flutes, ZPLUS Coated - (H45AL-RN-R-20625)
View AllClose
Additional Information
Cutter Diameter: |
0.6250" (5/8) |
Neck Diameter: |
0.5930" (19/32) |
Length of Cut: |
0.7500" (3/4) |
Overall Reach: |
1.6250" (1-5/8) |
Overall Length: |
4.0000" (4) |
Flutes: |
2 |
LOC Multiple: |
(1.2x) |
Shank Diameter: |
0.6250" (5/8) |
Metric: |
N |
Shank Length: |
2.3750" (2-3/8) |
Coating: |
ZPLUS |
Center Cutting: |
Y |
Chip Breaker: |
N |
Weldon Flat: |
N |
Coolant Through: |
N |
Related Products
Related Products
3 FL - Square - 35° Helix - 0.6250" (5/8) Cutter DIA x 0.6250" (5/8) Shank DIA x 0.7500" (3/4) LOC x 4.0000" (4) OAL x 1.6250" (1-5/8) Reach - ZPLUS Coated
HELICAL
$138.35
0.6250" (5/8) Cutter DIA x 0.6250" (5/8) Shank DIA x 0.7500" (3/4) Length of Cut x 4.0000" (4) Overall Length x 1.6250" (1-5/8) Reach Carbide 35° Helix Square End Mill for Aluminum, 3 Flutes, ZPLUS...
HELSO1-04347
4 FL - Square - 0.6250" (5/8) Cutter DIA x 0.6250" (5/8) Shank DIA x 0.7500" (3/4) LOC x 4.0000" (4) OAL x 1.6250" (1-5/8) Reach - APLUS Coated
HELICAL
$181.20
0.6250" (5/8) Cutter DIA x 0.6250" (5/8) Shank DIA x 0.7500" (3/4) Length of Cut x 4.0000" (4) Overall Length x 1.6250" (1-5/8) Reach Carbide Square End Mill for Steel, 4 Flutes, APLUS Coated -...
HELSO1-52272
3 FL - Square - 40° Helix - 0.6250" (5/8) Cutter DIA x 0.6250" (5/8) Shank DIA x 1.6250" (1-5/8) LOC x 4.0000" (4) OAL - ZPLUS Coated
HELICAL
$143.45
0.6250" (5/8) Cutter DIA x 0.6250" (5/8) Shank DIA x 1.6250" (1-5/8) Length of Cut x 4.0000" (4) Overall Length Carbide 40° Helix Square End Mill for Aluminum, 3 Flutes, ZPLUS Coated -...
HELSO1-48536
3 FL - Ball - 40° Helix - 0.6250" (5/8) Cutter DIA x 0.6250" (5/8) Shank DIA x 0.7500" (3/4) LOC x 4.0000" (4) OAL x 1.6250" (1-5/8) Reach - ZPLUS Coated
HELICAL
$176.25
0.6250" (5/8) Cutter DIA x 0.6250" (5/8) Shank DIA x 0.7500" (3/4) Length of Cut x 4.0000" (4) Overall Length x 1.6250" (1-5/8) Reach Carbide 40° Helix Ball End Mill for Aluminum, 3 Flutes, ZPLUS...
HELSO1-47301
3 FL - Square - 35° Helix - 0.6250" (5/8) Cutter DIA x 0.6250" (5/8) Shank DIA x 0.7500" (3/4) LOC x 4.0000" (4) OAL x 1.6250" (1-5/8) Reach - Uncoated
HELICAL
$118.60
0.6250" (5/8) Cutter DIA x 0.6250" (5/8) Shank DIA x 0.7500" (3/4) Length of Cut x 4.0000" (4) Overall Length x 1.6250" (1-5/8) Reach Carbide 35° Helix Square End Mill for Aluminum, 3 Flutes,...
HELSO1-04345