HELICAL
2 FL - Square - 45° Helix - 0.3125" (5/16) Cutter DIA x 0.3125" (5/16) Shank DIA x 2.1250" (2-1/8) LOC x 4.0000" (4) OAL - Uncoated
- SKU:
- HELSO1-00300
- MPN:
- 00300
- Shipping:
- Calculated at Checkout
Description
0.3125" (5/16) Cutter DIA x 0.3125" (5/16) Shank DIA x 2.1250" (2-1/8) Length of Cut x 4.0000" (4) Overall Length Carbide 45° Helix Square End Mill for Aluminum, 2 Flutes, Uncoated - (H45AL-X-20312)
View AllClose
Additional Information
Cutter Diameter: |
0.3125" (5/16) |
Length of Cut: |
2.1250" (2-1/8) |
Overall Length: |
4.0000" (4) |
Flutes: |
2 |
LOC Multiple: |
(6x) |
Web Thickness: |
0.0060" |
Shank Diameter: |
0.3125" (5/16) |
Metric: |
N |
Shank Length: |
1.8750" (1-7/8) |
Coating: |
UN |
Center Cutting: |
Y |
Chip Breaker: |
N |
Weldon Flat: |
N |
Coolant Through: |
N |
Related Products
Related Products
3 FL - Square - 45° Helix - 0.3125" (5/16) Cutter DIA x 0.3125" (5/16) Shank DIA x 2.1250" (2-1/8) LOC x 4.0000" (4) OAL - Uncoated
HELICAL
$72.60
0.3125" (5/16) Cutter DIA x 0.3125" (5/16) Shank DIA x 2.1250" (2-1/8) Length of Cut x 4.0000" (4) Overall Length Carbide 45° Helix Square End Mill for Aluminum, 3 Flutes, Uncoated - (H45AL-X-30312)
HELSO1-03300
3 FL - Square - 35° Helix - 0.3125" (5/16) Cutter DIA x 0.3125" (5/16) Shank DIA x 2.1250" (2-1/8) LOC x 4.0000" (4) OAL - Uncoated
HELICAL
$71.20
0.3125" (5/16) Cutter DIA x 0.3125" (5/16) Shank DIA x 2.1250" (2-1/8) Length of Cut x 4.0000" (4) Overall Length Carbide 35° Helix Square End Mill for Aluminum, 3 Flutes, Uncoated - (H35AL-X-30312)
HELSO1-01300
2 FL - Square - 45° Helix - 0.3125" (5/16) Cutter DIA x 0.3125" (5/16) Shank DIA x 0.4375" (7/16) LOC x 4.0000" (4) OAL x 2.1250" (2-1/8) Reach - Uncoated
HELICAL
$73.10
0.3125" (5/16) Cutter DIA x 0.3125" (5/16) Shank DIA x 0.4375" (7/16) Length of Cut x 4.0000" (4) Overall Length x 2.1250" (2-1/8) Reach Carbide 45° Helix Square End Mill for Aluminum, 2 Flutes,...
HELSO1-02180
Out of stock
2 FL - Square - 45° Helix - 0.3125" (5/16) Cutter DIA x 0.3125" (5/16) Shank DIA x 2.1250" (2-1/8) LOC x 4.0000" (4) OAL - ZPLUS Coated
HELICAL
$58.07
0.3125" (5/16) Cutter DIA x 0.3125" (5/16) Shank DIA x 2.1250" (2-1/8) Length of Cut x 4.0000" (4) Overall Length Carbide 45° Helix Square End Mill for Aluminum, 2 Flutes, ZPLUS Coated -...
HELSO1-00302
3 FL - Square - 45° Helix - 0.3125" (5/16) Cutter DIA x 0.3125" (5/16) Shank DIA x 2.5000" (2-1/2) LOC x 4.0000" (4) OAL - Uncoated
HELICAL
$77.60
0.3125" (5/16) Cutter DIA x 0.3125" (5/16) Shank DIA x 2.5000" (2-1/2) Length of Cut x 4.0000" (4) Overall Length Carbide 45° Helix Square End Mill for Aluminum, 3 Flutes, Uncoated - (H45AL-Y-30312)
HELSO1-87066