HELICAL
2 FL - Corner Radius - 0.5000" (1/2) Cutter DIA x 0.5000" (1/2) Shank DIA x 0.1250" (1/8) Radius x 0.5000" (1/2) LOC x 4.0000" (4) OAL x 2.5000" (2-1/2) Reach - Uncoated
- SKU:
- HELSO1-84579
- MPN:
- 84579
- Shipping:
- Calculated at Checkout
Description
0.5000" (1/2) Cutter DIA x 0.5000" (1/2) Shank DIA x 0.1250" (1/8) Radius x 0.5000" (1/2) Length of Cut x 4.0000" (4) Overall Length x 2.5000" (2-1/2) Reach Carbide Corner Radius High Balance End Mill for Aluminum, 2 Flutes, Uncoated - (HMG-R050-20500-R.125)
View AllClose
Additional Information
Cutter Diameter: |
0.5000" (1/2) |
Neck Diameter: |
0.4750" |
Length of Cut: |
0.5000" (1/2) |
Overall Reach: |
2.5000" (2-1/2) |
Overall Length: |
4.0000" (4) |
Corner Radius: |
0.1250" (1/8) |
Flutes: |
2 |
LOC Multiple: |
(1x) |
Shank Diameter: |
0.5000" (1/2) |
Metric: |
N |
Shank Length: |
1.5000" (1-1/2) |
Coating: |
UN |
Center Cutting: |
Y |
Chip Breaker: |
N |
Weldon Flat: |
N |
Coolant Through: |
N |
Related Products
Related Products
5 FL - Corner Radius - 0.5000" (1/2) Cutter DIA x 0.5000" (1/2) Shank DIA x 0.1250" (1/8) Radius x 2.0000" (2) LOC x 4.0000" (4) OAL - Uncoated
HELICAL
$124.80
0.5000" (1/2) Cutter DIA x 0.5000" (1/2) Shank DIA x 0.1250" (1/8) Radius x 2.0000" (2) Length of Cut x 4.0000" (4) Overall Length Carbide Corner Radius End Mill for Aluminum, 5 Flutes, Uncoated -...
HELSO1-84183
5 FL - Corner Radius - 0.5000" (1/2) Cutter DIA x 0.5000" (1/2) Shank DIA x 0.1250" (1/8) Radius x 2.0000" (2) LOC x 4.0000" (4) OAL - Uncoated
HELICAL
$132.30
0.5000" (1/2) Cutter DIA x 0.5000" (1/2) Shank DIA x 0.1250" (1/8) Radius x 2.0000" (2) Length of Cut x 4.0000" (4) Overall Length Carbide Corner Radius End Mill for Aluminum, 5 Flutes, Uncoated -...
HELSO1-84275
3 FL - Corner Radius - 0.5000" (1/2) Cutter DIA x 0.5000" (1/2) Shank DIA x 0.1250" (1/8) Radius x 0.6250" (5/8) LOC x 2.5000" (2-1/2) OAL - Uncoated
HELICAL
$92.60
0.5000" (1/2) Cutter DIA x 0.5000" (1/2) Shank DIA x 0.1250" (1/8) Radius x 0.6250" (5/8) Length of Cut x 2.5000" (2-1/2) Overall Length Carbide Corner Radius Coolant Through End Mill for Aluminum, 3...
HELSO1-88127
5 FL - Corner Radius - 0.5000" (1/2) Cutter DIA x 0.5000" (1/2) Shank DIA x 0.1250" (1/8) Radius x 1.6250" (1-5/8) LOC x 4.0000" (4) OAL - Uncoated
HELICAL
$123.70
0.5000" (1/2) Cutter DIA x 0.5000" (1/2) Shank DIA x 0.1250" (1/8) Radius x 1.6250" (1-5/8) Length of Cut x 4.0000" (4) Overall Length Carbide Corner Radius End Mill for Aluminum, 5 Flutes, Uncoated...
HELSO1-84181
2 FL - Corner Radius - 45° Helix - 0.5000" (1/2) Cutter DIA x 0.5000" (1/2) Shank DIA x 0.0300" Radius x 2.0000" (2) LOC x 4.0000" (4) OAL - Uncoated
HELICAL
$63.97
0.5000" (1/2) Cutter DIA x 0.5000" (1/2) Shank DIA x 0.0300" Radius x 2.0000" (2) Length of Cut x 4.0000" (4) Overall Length Carbide 45° Helix Corner Radius End Mill for Aluminum, 2 Flutes, Uncoated...
HELSO1-82371