HELICAL
2 FL - Ball - 45° Helix - 0.3750" (3/8) Cutter DIA x 0.3750" (3/8) Shank DIA x 1.2500" (1-1/4) LOC x 3.5000" (3-1/2) OAL - Uncoated
- SKU:
- HELSO1-83421
- MPN:
- 83421
- Shipping:
- Calculated at Checkout
Description
0.3750" (3/8) Cutter DIA x 0.3750" (3/8) Shank DIA x 1.2500" (1-1/4) Length of Cut x 3.5000" (3-1/2) Overall Length Carbide 45° Helix Ball End Mill for Aluminum, 2 Flutes, Uncoated - (H45AL-M-20375-BN)
View AllClose
Additional Information
Cutter Diameter: |
0.3750" (3/8) |
Length of Cut: |
1.2500" (1-1/4) |
Overall Length: |
3.5000" (3-1/2) |
Flutes: |
2 |
LOC Multiple: |
(3.3x) |
Shank Diameter: |
0.3750" (3/8) |
Metric: |
N |
Shank Length: |
2.2500" (2-1/4) |
Coating: |
UN |
Center Cutting: |
Y |
Chip Breaker: |
N |
Weldon Flat: |
N |
Coolant Through: |
N |
Related Products
Related Products
3 FL - Square - 45° Helix - 0.3750" (3/8) Cutter DIA x 0.3750" (3/8) Shank DIA x 1.2500" (1-1/4) LOC x 3.5000" (3-1/2) OAL - Uncoated
HELICAL
$49.70
0.3750" (3/8) Cutter DIA x 0.3750" (3/8) Shank DIA x 1.2500" (1-1/4) Length of Cut x 3.5000" (3-1/2) Overall Length Carbide 45° Helix Square End Mill for Aluminum, 3 Flutes, Uncoated - (H45AL-M-30375)
HELSO1-03360
2 FL - Ball - 45° Helix - 0.3750" (3/8) Cutter DIA x 0.3750" (3/8) Shank DIA x 1.5000" (1-1/2) LOC x 3.5000" (3-1/2) OAL - Uncoated
HELICAL
$67.40
0.3750" (3/8) Cutter DIA x 0.3750" (3/8) Shank DIA x 1.5000" (1-1/2) Length of Cut x 3.5000" (3-1/2) Overall Length Carbide 45° Helix Ball End Mill for Aluminum, 2 Flutes, Uncoated -...
HELSO1-81323
2 FL - Square - 45° Helix - 0.3750" (3/8) Cutter DIA x 0.3750" (3/8) Shank DIA x 1.2500" (1-1/4) LOC x 3.5000" (3-1/2) OAL - Uncoated
HELICAL
$48.80
0.3750" (3/8) Cutter DIA x 0.3750" (3/8) Shank DIA x 1.2500" (1-1/4) Length of Cut x 3.5000" (3-1/2) Overall Length Carbide 45° Helix Square End Mill for Aluminum, 2 Flutes, Uncoated - (H45AL-M-20375)
HELSO1-00360
3 FL - Ball - 0.3750" (3/8) Cutter DIA x 0.3750" (3/8) Shank DIA x 1.2500" (1-1/4) LOC x 3.5000" (3-1/2) OAL - Uncoated
HELICAL
$61.90
*THE ENTIRE HELICAL BRAND IS ONLY AVAILABLE FOR TEXAS* 0.3750" (3/8) Cutter DIA x 0.3750" (3/8) Shank DIA x 1.2500" (1-1/4) Length of Cut x 3.5000" (3-1/2) Overall Length Carbide Ball End Mill for...
HELSO1-89224
2 FL - Ball - 45° Helix - 0.3750" (3/8) Cutter DIA x 0.3750" (3/8) Shank DIA x 1.2500" (1-1/4) LOC x 3.5000" (3-1/2) OAL - ZPLUS Coated
HELICAL
$72.75
0.3750" (3/8) Cutter DIA x 0.3750" (3/8) Shank DIA x 1.2500" (1-1/4) Length of Cut x 3.5000" (3-1/2) Overall Length Carbide 45° Helix Ball End Mill for Aluminum, 2 Flutes, ZPLUS Coated -...
HELSO1-83422