HELICAL
2 FL - Ball - 45° Helix - 0.3750" (3/8) Cutter DIA x 0.3750" (3/8) Shank DIA x 0.7500" (3/4) LOC x 2.5000" (2-1/2) OAL - Uncoated
- SKU:
- HELSO1-83419
- MPN:
- 83419
- Shipping:
- Calculated at Checkout
Description
0.3750" (3/8) Cutter DIA x 0.3750" (3/8) Shank DIA x 0.7500" (3/4) Length of Cut x 2.5000" (2-1/2) Overall Length Carbide 45° Helix Ball End Mill for Aluminum, 2 Flutes, Uncoated - (H45AL-SR-20375-BN)
View AllClose
Additional Information
Cutter Diameter: |
0.3750" (3/8) |
Length of Cut: |
0.7500" (3/4) |
Overall Length: |
2.5000" (2-1/2) |
Flutes: |
2 |
LOC Multiple: |
(2x) |
Shank Diameter: |
0.3750" (3/8) |
Metric: |
N |
Shank Length: |
1.7500" (1-3/4) |
Coating: |
UN |
Center Cutting: |
Y |
Chip Breaker: |
N |
Weldon Flat: |
N |
Coolant Through: |
N |
Related Products
Related Products
2 FL - Square - 45° Helix - 0.3750" (3/8) Cutter DIA x 0.3750" (3/8) Shank DIA x 0.7500" (3/4) LOC x 2.5000" (2-1/2) OAL - Uncoated
HELICAL
$35.40
0.3750" (3/8) Cutter DIA x 0.3750" (3/8) Shank DIA x 0.7500" (3/4) Length of Cut x 2.5000" (2-1/2) Overall Length Carbide 45° Helix Square End Mill for Aluminum, 2 Flutes, Uncoated - (H45AL-SR-20375)
HELSO1-81313
3 FL - Square - 45° Helix - 0.3750" (3/8) Cutter DIA x 0.3750" (3/8) Shank DIA x 0.7500" (3/4) LOC x 2.5000" (2-1/2) OAL - Uncoated
HELICAL
$36.10
0.3750" (3/8) Cutter DIA x 0.3750" (3/8) Shank DIA x 0.7500" (3/4) Length of Cut x 2.5000" (2-1/2) Overall Length Carbide 45° Helix Square End Mill for Aluminum, 3 Flutes, Uncoated - (H45AL-SR-30375)
HELSO1-81559
3 FL - Ball - 40° Helix - 0.3750" (3/8) Cutter DIA x 0.3750" (3/8) Shank DIA x 0.7500" (3/4) LOC x 2.5000" (2-1/2) OAL - Uncoated
HELICAL
$49.70
0.3750" (3/8) Cutter DIA x 0.3750" (3/8) Shank DIA x 0.7500" (3/4) Length of Cut x 2.5000" (2-1/2) Overall Length Carbide 40° Helix Ball End Mill for Aluminum, 3 Flutes, Uncoated -...
HELSO1-82461
3 FL - Ball - 0.3750" (3/8) Cutter DIA x 0.3750" (3/8) Shank DIA x 0.7500" (3/4) LOC x 2.5000" (2-1/2) OAL - Uncoated
HELICAL
$48.80
*THE ENTIRE HELICAL BRAND IS ONLY AVAILABLE FOR TEXAS* 0.3750" (3/8) Cutter DIA x 0.3750" (3/8) Shank DIA x 0.7500" (3/4) Length of Cut x 2.5000" (2-1/2) Overall Length Carbide Ball End Mill for...
HELSO1-89220
3 FL - Ball - 40¡ Helix - 0.3750" (3/8) Cutter DIA x 0.3750" (3/8) Shank DIA x 0.7500" (3/4) LOC x 2.5000" (2-1/2) OAL
HELICAL
$78.70
0.3750" (3/8) Cutter DIA x 0.3750" (3/8) Shank DIA x 0.7500" (3/4) Length of Cut x 2.5000" (2-1/2) Overall Length Carbide 40¡ Helix Ball End Mill for Aluminum, 3 Flutes - (H40ALV-SR-30375-BN)
HELSO1-87830