TITAN USA
-
0.3125" (5/16) Cutter DIA x 0.8125" (13/16) Length of Cut Carbide Ball End Mill, 3 Flutes, TiCN Coated
TITAN USA
Now: $28.41Was: $31.560.3125" (5/16) Cutter DIA x 0.8125" (13/16) Length of Cut Carbide Ball End Mill, 3 Flutes, TiCN CoatedTC92120Now: $28.41Was: $31.56 -
0.3125" (5/16) Cutter DIA x 0.8125" (13/16) Length of Cut Carbide Square End Mill, 3 Flutes, TiCN Coated
TITAN USA
Now: $23.13Was: $25.700.3125" (5/16) Cutter DIA x 0.8125" (13/16) Length of Cut Carbide Square End Mill, 3 Flutes, TiCN CoatedTC90820Now: $23.13Was: $25.70 -
0.3125" (5/16) Cutter DIA x 0.7500" (3/4) Length of Cut Cobalt Fine Pitch Rougher, 4 Flutes, Uncoated
TITAN USA
Now: $63.49Was: $70.540.3125" (5/16) Cutter DIA x 0.7500" (3/4) Length of Cut Cobalt Fine Pitch Rougher, 4 Flutes, UncoatedTE66109Now: $63.49Was: $70.54 -
0.3125" (5/16) Cutter DIA x 0.7500" (3/4) Length of Cut Cobalt Course Pitch Rougher, 4 Flutes, Uncoated
TITAN USA
Now: $63.49Was: $70.540.3125" (5/16) Cutter DIA x 0.7500" (3/4) Length of Cut Cobalt Course Pitch Rougher, 4 Flutes, UncoatedTE63409Now: $63.49Was: $70.54 -
0.3125" (5/16) Cutter DIA x 0.8125" (13/16) Length of Cut Carbide Square End Mill, 3 Flutes, AlTiN Coated
TITAN USA
Now: $23.28Was: $25.860.3125" (5/16) Cutter DIA x 0.8125" (13/16) Length of Cut Carbide Square End Mill, 3 Flutes, AlTiN CoatedTC99820Now: $23.28Was: $25.86 -
0.3125" (5/16) Shank DIA x 120° Included Angle x 2.5000" (2-1/2) Overall Length X 0.0600" Tip DIA Carbide Tipped Off Chamfer Mill, 4 Flutes, AlTiN Coated
TITAN USA
Now: $36.17Was: $40.180.3125" (5/16) Shank DIA x 120° Included Angle x 2.5000" (2-1/2) Overall Length X 0.0600" Tip DIA Carbide Tipped Off Chamfer Mill, 4 Flutes, AlTiN CoatedTC87832Now: $36.17Was: $40.18 -
0.3125" (5/16) Shank DIA x 100° Included Angle x 2.5000" (2-1/2) Overall Length X 0.0600" Tip DIA Carbide Tipped Off Chamfer Mill, 4 Flutes, AlTiN Coated
TITAN USA
Now: $36.17Was: $40.180.3125" (5/16) Shank DIA x 100° Included Angle x 2.5000" (2-1/2) Overall Length X 0.0600" Tip DIA Carbide Tipped Off Chamfer Mill, 4 Flutes, AlTiN CoatedTC87820Now: $36.17Was: $40.18 -
0.3125" (5/16) Shank DIA x 90° Included Angle x 2.5000" (2-1/2) Overall Length X 0.0600" Tip DIA Carbide Tipped Off Chamfer Mill, 4 Flutes, AlTiN Coated
TITAN USA
Now: $36.17Was: $40.180.3125" (5/16) Shank DIA x 90° Included Angle x 2.5000" (2-1/2) Overall Length X 0.0600" Tip DIA Carbide Tipped Off Chamfer Mill, 4 Flutes, AlTiN CoatedTC87808Now: $36.17Was: $40.18