MICRO 100
-
0.1875" (3/16) Shank DIA x 90° included DE
MICRO 100
$37.050.1875" (3/16) Shank DIA x 90° included Carbide Tipped Engraver DERNC-187-2$37.05 -
0.1875" (3/16) Shank DIA x 90° included - AlTiN Coated
MICRO 100
$38.300.1875" (3/16) Shank DIA x 90° included Carbide Tipped Engraver, AlTiN CoatedRNC-187-13X$38.30 -
0.1875" (3/16) Shank DIA x 90° included
MICRO 100
$32.800.1875" (3/16) Shank DIA x 90° included Carbide Tipped EngraverRNC-187-13$32.80 -
0.1250" (1/8) Shank DIA x 90° included DE
MICRO 100
$36.550.1250" (1/8) Shank DIA x 90° included Carbide Tipped Engraver DERNC-125-23$36.55 -
0.1250" (1/8) Shank DIA x 90° included - AlTiN Coated
MICRO 100
$30.900.1250" (1/8) Shank DIA x 90° included Carbide Tipped Engraver, AlTiN CoatedRNC-125-1X$30.90 -
0.1250" (1/8) Shank DIA x 90° included
MICRO 100
$29.250.1250" (1/8) Shank DIA x 90° included Carbide Tipped EngraverRNC-125-13$29.25 -
4 FL - 0.1719" (11/64) Cutter DIA x 0.313" LOC - AlTiN Coated
MICRO 100
$28.500.1719" (11/64) Cutter DIA x 0.313" Length of Cut Carbide Square End Mill, 4 Flutes, AlTiN CoatedSEM-171-04X$28.50 -
4 FL - 0.1719" (11/64) Cutter DIA x 0.313" LOC
MICRO 100
$24.800.1719" (11/64) Cutter DIA x 0.313" Length of Cut Carbide Square End Mill, 4 FlutesSEM-171-04$24.80 -
4 FL - 0.1562" (5/32) Cutter DIA x 0.313" LOC - AlTiN Coated
MICRO 100
$28.500.1562" (5/32) Cutter DIA x 0.313" Length of Cut Carbide Square End Mill, 4 Flutes, AlTiN CoatedSEM-156-04X$28.50 -
4 FL - 0.1562" (5/32) Cutter DIA x 0.313" LOC
MICRO 100
$24.800.1562" (5/32) Cutter DIA x 0.313" Length of Cut Carbide Square End Mill, 4 FlutesSEM-156-04$24.80 -
Out of stock
4 FL - 0.1406" (9/64) Cutter DIA x 0.250" (1/4) LOC - AlTiN Coated
MICRO 100
$28.500.1406" (9/64) Cutter DIA x 0.250" (1/4) Length of Cut Carbide Square End Mill, 4 Flutes, AlTiN CoatedSEM-140-04X$28.50 -
4 FL - 0.1406" (9/64) Cutter DIA x 0.250" (1/4) LOC
MICRO 100
$24.800.1406" (9/64) Cutter DIA x 0.250" (1/4) Length of Cut Carbide Square End Mill, 4 FlutesSEM-140-04$24.80